Where does the iDrac get its time if you don't set the NTP server?
Howdy,I know that in the IDrac settings there is a place to turn on Time sync and specify a Time Server. However, if I don't have that turned on, where does the iDrac get its time?We have time sync...
View ArticleDell T20 PowerEdge will only go to Intel Boot Agent and then hangs.
Hi,I have a PowerEdge T20. It was working fine with a SSD disk for windows 10 and another 1TB WD disk for data. I added another disk on which I wanted to install Linux which initially went OK.However...
View Article2 HD blinking Green/orange
Hello,I just check servers from one of my customers, 2 hard drives have LED blinking green/orange. I suppose there is/will be an issue (doc said The server is a PowerEdge R720xd. I used RAID 5, with 6...
View ArticleDell 5600W 230volt Battery part number
Hi, I have a 5600W 230 volt ups but i require a new battery, can anyone tell what part number it is as i'm having difficulty finding it.Thanks
View ArticlePowerEdge T20 ePSA memory test fail
TL;DR - Dell T20 systems work just fine, but ePSA memory test fails with newer BIOS. ePSA memory test passed with old BIOS. Windows memory tests pass with no errors. Here are the details: I am a...
View ArticleMD3000i Controller Issues - Non Optimal Array
Recently my duel controller MD3000i become non-optional, what seems to be to a battery issue in the controller in Slot 1. I took the controller offline, pulled the controller and replaced the battery....
View Articler910 not booting
Hello,i have a R910 motherboard, i have brought it down to min config and it still won't boot.there are red LEDs on the board - 0 and 5 flash red and 1 is solid redwhat do each of the LEDs correspond...
View ArticlePowerEdge R610 E1211 RAID controller battery Failure PERC H700
The front panel display turns yellow and says RAID controller battery failure. Check battery.Reading 47 dozen knowledge base articles has not been a whole lot of help. There is some docs that say...
View ArticleWhy would a server reboot after losing one power supply?
One of our data centers had a power issue over the weekend that affected one of our UPS devices. OMSA shows that input power to PSU2 was lost but PSU1 was fine.However, the servers all rebooted...
View Article