Poweredge R630 image compatability
HiI have a poweredge R630 Currently running with dual E5 2620v3 processors.My question is, would a backup image from this machine be compatable with an R630 with dual E5 2620v4 processors??Trying to...
View ArticlePowerEdge T320 support for E5-2450L
Hello Community,I want to know if the T320 supports the E5-2450L processor. Because on the product-page it says that Intel® Xeon® E5-2400 processors are supported but the whitepaper does not list the...
View ArticleRNIC - RDMA for R910
Hi, need to check Nic for R910 servers with support to RDMA.I check BCM5709C , but apparently requires a license."RDMA controller (RNIC) (enabled through an optional hardware key)"Does anyone know what...
View ArticleCannot upgrade BIOS at DELL PE R710
Hello, sorry for my english if it has some grammar mistakes and sorry if its in wrong part of forum.I have two DELL PE R710.1st has 1.1.4 BIOS and 2nd is on 2.2.1Tried to download BIOS from the support...
View ArticleNVMe Express Flash for Poweredge R910.
“Express Flash NVMe PCIe SSD” After searching for a serial number on a SSD PCIe disk, I do not see anywhere compatible with R910.Anyone have any information that can help me?"Express Flash NVMe PCIe...
View ArticlePoweredge 1300, circa 12/99 - can't find listing for this beep code
Client says screen shows message about cover removed but that has been there a while.Someone shut it down to change out a UPS apparently, now when this machine is turned on itemits a beeeeeep-beeeeep,...
View ArticleInstallation of Windows Server 2008 SP2 (32-Bit) on Power Edge T430
Hello!I am trying to install Windows Server 2008 SP2 (32-Bit) on Power Edge T430 as i have to install Yokogawa Centum VP R4.03 software which will only be compatible with 32Bit OS, but the machine...
View ArticleDell R710 and IDRAC6
I am running a R710 Server. I am using an external VGA card instead of the one built in VGA port. When I access IDRAC using the external VGA card I get nothing displayed from the console. When I use...
View ArticlePE R415 eliminate software RAID controller
Hi,I have a Dell PowerEdge R415 that has a backplane for 4 hot swappable drives and uses the PERC S300 Software RAID controller.I want to install ESXi 6.0 but it wont recognize the local drives. VMWare...
View ArticleRaid 5 issue
Hello, I have the following situation for Dell Server 2950 with Perc 6/i Raid Controller, the server has 3 Disks Configured as Raid 5 with SAS 300 GB each and one SATA Hard Disk configured as Raid 0 ....
View ArticleT310 PERC S100 RAID-5 showing wrong capacity/size after HDD replacement
Hello.Today I replaced a failed HDD, in a RAID-5 array, with a new HDD.As far as I can tell, everything is working fine. The new HDD has been assigned to the array and it is in the process of being...
View ArticleOMSA 8.5 Login faild
Hi,we have installed ESXi 6.5 on a R720 with the latest ISO from Dell.- In OME 2.3 i can see the Server over iDRAC but it showing a ESXi 6.0 OS.- with a Discovery over WS-MAN + SNMP (ESXi Host +...
View ArticlePowerEdge 1800 don't boot up
Hello guys,We have a PowerEdge 1800 server. We decided to upgrade it from Windows 2003 to Windows 2008 R2. So we started to install Windows 2008 from scratch. The first problem was the RAID controller...
View ArticleClik here to view.
How to Diagnose a Flashing Red/Amber Light on Dell PowerEdge 1950
The server has a flashing red/amber light in the back of it while all the HDD seem to be working fine. How can I run a diagnostics test to figure out what the flashing light means? This is windows...
View ArticleMEMORY IN R710 QUAD-RANKED
AFTERNOON FOLKS, I TRIED TO DO AN UPGRADE IN MY R710, MY IDEA WAS PUT 8 MEMORY DIMM'S 8GB QUAD-RANK 8500 TO HAVE A 64GB CONFIGURATION, BUT JUST RECOGNIZE 48GB.I TRIED TO READ THE HARDWARE OWNER MANUAL...
View ArticleH200 >2.2TB SATA support
Does the H200 card, updated to the last firmware, support SATA drives larger than 2.2TB (in RAID 10)?
View ArticleEvent 11
Hi,We having a problem with one of our Powerdge R710. Today server has lost its E drive, rebooted the server still not back. did run Dell server manager and it shows no defect drive, and it only shows...
View ArticlePowerEdge 1800 don't boot up
Hello guys,We have a PowerEdge 1800 server. We decided to upgrade it from Windows 2003 to Windows 2008 R2. So we started to install Windows 2008 from scratch. The first problem was the RAID controller...
View ArticleH200 >2.2TB SATA support
Does the H200 card, updated to the last firmware, support SATA drives larger than 2.2TB (in RAID 10)?
View ArticleDell Diagnostic Utility Error Message
I recently ran the Dell Diagnostic Utility on my PowerEdge T310 ,service tag=<removed>, and when I scanned the drives, it gave me this report:ErrorsError Code: 4400-011BMsg:...
View Article