How to connect to server via iDRAC, python
Hi!I'm connecting to iDRAC via ssh (putty.exe -ssh root@''iDRAC-IP') to the server itself (via command >connect) and it's working fine (both iDRAC and server is password protected). Now I'm trying...
View Articlereview & clear SEL E171F PCIe Fatal error on bus 0 device 5 Function 0
I have this error, how can i fix them? please thank,review & clear SEL E171F PCIe Fatal error on bus 0 device 5 Function 0
View ArticleClik here to view.
How to I enable iDrac System Alerts Page 1-thru-20 in one shot?
Re: Alerts and Remote System Log ConfigurationHow to I enable iDrac System Alerts Page 1-thru-20 in one shot? What is the syntax to do it command line if possible. Currently I have to go through each...
View ArticleNew Dell R730 can't select Local SD card as boot device
Boot mode is UEFIMy only option for boot devices are; Embedded SATA Optical Drive and PXE NIC 1I can't see the local CD cards or my PERC H730.System Model PowerEdge R730 System Revision I BIOS...
View ArticleIDrac - Error CPLD version 103 after applying firmware and bios updates - Now...
I have a PowerEdge T620 Server. I was going firmware and bios updates on it.. Somehow the Idrac (Which I didn’t use, wont Initialize and the Lifecycle Controller says it is disable. )I...
View Articlepoweredge 860 motherboard generation inquiry
I have a 860 poweredge and i'm having to replace the motherboard the board i'm replacing isokm697 with a orh817 Mboard where do i find the specs on these two Mboards or can someone tell the specs on...
View ArticleT330 ACHI vs. RAID
Sorry if this is a newbie question, but I've not dealt with Dell servers a lot. That said, I have a new T330 with 4 SATA drives installed in the first 4 bays. In the System BIOS settings, the...
View ArticleCan't update firmware H310
As the title says I can't update my H310 raid card with this firmware:Dell PERC H310 Adapter Firmware release 20.13.2-0006If im using windows it says that my system is not supported and using Linux it...
View Articleclock speed. CPU
Sorry for my English.PowerEdge C6100.CPUL5520 (2.27 GHz).Inserted 3 nodes from 4.Energy saving is disabled everywhere.When I turn on 3 nodes at the same time, the clock speed of the CPU on one of the...
View ArticlePowerEdge 800 (PERC 4) RAID failure; rebuild questions
Hello. This is not my machine - a client had it operating quietly for 10+ years without backup. Hurray! It has 4 x 147GB SCSI 68pin drives in a RAID 5 array.Anyways, things were supposedly going...
View ArticleUpgrade the Perc H310
I have an old Dell R520 with a Perc H310 controller currently. I am re-purposing this server to be a Veeam backup server. Currently, the performance of the H310 is not that fast. I am wondering if I...
View ArticleSecond Power Supply
I need to add a second power supply to a PowerEdge R520 (<removed>). It has 1100 watt PSU now, can I add this GYH9V ?
View Articlem1000E BLADE network connectivity
Hello,I have a M1000e chassis with blades. The first 4 blade are half height and can connect to the network.I'm now trying to configure slot 7 which is a full height blade. I have the OS installed...
View ArticleT610 CPU & R410
Can someone tell me if the processor below would work with my R410 and T610?2.8GHz Intel Xeon X5560 Quad Core 6.4 GT/s 8MB L3 Cache Socket LGA1366 SLBF4
View ArticleAdding memory to an R630
We have a dual CPU R630 which was supplied with a total of 16 x 16 GB RDIMMs (2133 MT/s, dual rank, x4 data rate) factory-fitted for a total installed memory of 256 GB. These RDIMMs are in slots A1-8...
View ArticlePower Edge R520 IDrac Issues
I have a power edge r520 unit, has worked well for years. Now randomly during startup it says initializing IDrac and fails, then needs an F1 to start. The server never had an IDrac card installed....
View ArticleRaid config--R510
I have a R510 server.The OS runs on a Raid 1 config. The drive the OS needs more capacity. If I slide one of the current 500gb drives out and slide in a new 1tb drive, let it sync and then repeat the...
View ArticleClik here to view.
How to I enable iDrac System Alerts Page 1-thru-20 in one shot?
Re: Alerts and Remote System Log ConfigurationHow to I enable iDrac System Alerts Page 1-thru-20 in one shot? What is the syntax to do it command line if possible. Currently I have to go through each...
View ArticleWhere is PERC H330 Mini firmware 25.4.0.0011?
I installed OMSA 8.3 last week on a brand new R430 with all the latest available firmware upgrades applied.Despite this the server alerts about:"The current firmware version 25.3.0.0016 is older than...
View ArticleBCM57800
Hi,What is the recommended version of firmware and driver for the BCM57800 network card? We had a glitch with the ISCSI connection to a Compellent SAN.The server is a Winows Server 2012R2 Hyper-V...
View Article