Clik here to view.
Degraded RAID 1 Array
Hi,I have a Dell Power Edge that is indicating a degraded RAID 1 array. The physical drives have the following status:Drive 0:0, Online, capacity 465.75GB, Used RAID Disk Space: 465.75GB Available...
View ArticleiDRAC6 SSL key upload
Hello,I am trying to configure SSL for iDRAC6 and the command to upload the SSL key to the DRAC is not available. I have updated the firmware walking it all the way from 3.33 to 3.85 for the iDRAC. I...
View ArticleiDRAC6 lock down
I have a iDRAC6 with version 1.2 which has iDRAC Lan option as off, this version of IDRAC firmware has a bug which causes a communication error with IDRAC during POST when iDRAC Lan is off.I am capable...
View ArticleSATA Controller
Hi, I am after a SATA controller for my Dell 720. I do not want a Raid controller, just a SATA controller. Can you suggest one?Thanks..
View ArticleR620 - NIC firmware won't update
Howdy,The i350 NICs in my R620 server won't apply their update. It currently shows as version 0.0.0 and I'm trying to install 17.5.10.I tried to install from an SUU package first and that failed. I...
View ArticleH810/OpenManage failing drives
Had a lot of five year old 3TB and 4TB SAS drives fail this year on an H810, RAID6. Maybe to be expected.Some questions:1.) Who fails the drive? The H810 or Openmanage?2.) OpenManage doesn't show...
View ArticlePoweredge T110 No Video
I have a T110and was working fine . i put in new memory and booted it up pressed F1 it seen new memory and booted into windows ok as this server is for an up and coming project i left it to one side...
View ArticleT110 power on no video no response
T110 fans turns on as soon as power is connected.there is no video no response.light indicator is a follows:1) 1, 3, 4 after 10 seconds2) 1 remains onRam is working fine ( i tested it on another...
View ArticleClik here to view.
RAID 1 Degraded - The disk is not certified.
Hello, I am changing the hard disk of the server blade M620, the disk use a RAID 1.OpenManage of Dell shows me the that the disk is "Non certified" when I insert the disk, and the iDRAC doesn't detect...
View ArticlePowerEdge R520 mixed memory configuration
Hello,I have a dual-processor PowerEdge R520, and I want to upgrade the memory, while retaining as many of my existing DIMMs as I can (all, preferably!). It currently has 32GB in 8x 4GB ECC DDR3...
View ArticleC6300 Disk partitioning...
We are contemplating purchasing one used PE C6300 chassis with three C6320 compute blocks. 1. Can anyone describe how one allocates hard drives in the 24-HDD collection to each compute block? Are...
View ArticleI1910 Intrusion Error with PCIe Training Error: Internal Storage Slot
The monitor shows System Halted! right after the message press Ctrl+E to access DRAC and the system stops booting any further with a message: PCIe Training Error: Internal Storage SlotWhile the front...
View ArticleGetting "memory configuration is not optimal press f1 to continue"...
I replaced the entire fleet of 2gb memory sticks in a Dell Poweredge R715 with: Crucial 16GB Kit (2 x 8GB) DDR3-1600 ECC RDIMM (Part#CT5321400).I have two processors, so following the manual, I...
View ArticleR920- Single SSD reads as "Disk.DIrect" when part of a RAID 10
Good dayI am having some trouble trying to figure out why one SSD in a RAID 10, eight drives total, is reading as "disk.direct" while all others, including in another RAID set, all read "disk.bay."All...
View ArticleSSL Certificate Verification Failed
OME discovers iDRACs and they are 'unknown'.Troubleshooting Tool says 'Error: A server certificate could not be validated. PartialChain: A certificate chain could not be built to a trusted root...
View ArticleCan't install new OS on Dell PowerEdge 750/850/2850
Hey everybody,I recently purchased 14x server computers for a grand total of $50 altogether. Now, the computers are a mix of HP Proliants and Dell PowerEdges. I'm no expert at server computers, so...
View ArticleProgramatically connect to iDrac Virtual Console?
Is there a way to connect to the iDrac Virtual Console via a racadm command? or directly by navigating to a url? Or some other way?I connect to the Virtual Console frequently on a bunch of different...
View ArticleT320 H710 - Windows Server Issues
Hi,I'm currently trying to set up my T320 with a H710 card.I have 8 disks currently configured and being detected by the controller, with Windows Server 2016 already installed (along with the other...
View ArticlePowerEdge r320 - SWC 0700 Error
Hi all, I am currently struggling to find a solution for the 'SWC0700: iDRAC is not ready' error. The error started occurring when we had to take off the server from a battery backup, due to the backup...
View ArticleI1910 Intrusion Error with PCIe Training Error: Internal Storage Slot
The monitor shows System Halted! right after the message press Ctrl+E to access DRAC and the system stops booting any further with a message: PCIe Training Error: Internal Storage SlotWhile the front...
View Article