XML import stuck at 10% on PowerEdge R430
The XML import job is permanently stuck at 10% on my R430. It seems that the server fails to power-on by itself. If I do a manual power-on, the Lifecycle controller screen appears and you can see the...
View ArticleCommunication between Switches and iDrac controllers
Hi,Connection view allows servers admin to view the physical mapping of switch ports to server’s network ports and iDRAC through LLDP protocol but is it possible to monitor iDrac from switcjhes via the...
View ArticleDell powerEdge 2900 Not Detecting Hard Disks - Controller 0, No configuration...
System has been running for a number of years practically error free, yesterday morning system fails to boot. CTRL R reveals "no configuration present". I follow articles and seems that a foreign...
View ArticleSAS 6/iR HDD question
Hello.There is a card in the DELL T110 server.Original installation:Connector 0Virtual Disk 0, RAID 1, Disk 0,12 x 1TB NSAS HDD-----------------------New installation I want to add:Conncertor 0Virtual...
View ArticlePERC H730 and mix of SAS 12Gbps and SATA 6Gbps
Hello everyone,I am looking into having the following arrangement on a PERC H730:1x RAID1 volume w/ (2) 960GB 6Gbps SATA drives1x RAID10 volume w/ (8) 1.8TB 12Gbps SAS drivesShould I expect the whole...
View ArticleR510 Will Not Boot
I just installed Debian 9 on an SSD and tried to boot the system. In BIOS there are no available boot devices shown and in the UEFI boot device options it says " *Unavailable: debian" (highlighted in...
View ArticleIntegrated Intel GPU on R330 server
Hi,After receiving of ordered R330 server with E3-1225v5 CPU with integrated graphic intel HD P530, it was found that the integrated GPU is disabled. To run specifiс software product on this server it...
View ArticleXML import stuck at 10% on PowerEdge R430
The XML import job is permanently stuck at 10% on my R430. It seems that the server fails to power-on by itself. If I do a manual power-on, the Lifecycle controller screen appears and you can see the...
View ArticleNvidia tesla m40 insufficiently powered in poweredge r730
Hello, I got new Dell PowerEdge r730 server with factory installed Nvidia Tesla m40 in it. I installed ESXi hypervisor and Debian 9 GNU/Linux OS on top of it. I also installed proprietary drivers from...
View ArticleR510 Will Not Boot
I just installed Debian 9 on an SSD and tried to boot the system. In BIOS there are no available boot devices shown and in the UEFI boot device options it says " *Unavailable: debian" (highlighted in...
View ArticleDell R720 with PCIe SSD Backplane and Extender Card, but no drives showing
HiWe have a Dell R720 , Tag: <removed>We've removed the 16 Bay SAS BP and installed an 8 Bay SAS and 4 Bay PCIe BP (22FYP)We've installed a PCIe Extender card in Slot4 (Dell YPNRC 4-Port SAS...
View ArticleMD3000i Controller Issues - Non Optimal Array
Recently my duel controller MD3000i become non-optional, what seems to be to a battery issue in the controller in Slot 1. I took the controller offline, pulled the controller and replaced the battery....
View ArticleIDRAC7
I have a PowerEdge T620 and have configured idrac7.When the server OS is up and running I can access idrac remotely.I just restarted the server to install windows updates and during the restart period...
View ArticleDoes Poweredge 1600sc support 2gb RAM?
What RAMs Poweredge 1600sc can handle?Does the motherboard support 2GB PC-2100?From what I could figure out from the Internet, it supports 4x1gb, but I could find nothing about 2gb sticks.I have...
View ArticleSD card module & CABLE for T710 & T610
hi having difficulty re locating cable or eveb part numbers for (optional) SD card modules for these PE T710&610 -is there a workaround re cables (I have been seeing quite a few with length...
View ArticlePoweredge r420 replaced sysboard- now cannot see both SAS drives
Hello!I have just replaced the system board in our Poweredge and when I try to boot the system cannot detect any of the 2 x 1T SAS drives. It only detects the NIC cards and the DVD drive. They were...
View ArticlePowerEdge T710 Intrusion Detection not Clearing, Failed System Board Battery...
Hey people, I am having a number of issues with my Dell PowerEdge T710, recently I have been getting error messages on my iDRAC6 (enterprise) dashboard that the system board batty has failed. I...
View ArticleT710 not listed as supporting OS Windows Server 2016 - What is likely to go...
I want to install Windows Server 2016 Standard on a PowerEdge T710 currently running 2012R2. The T710 (11th Generation) model is not listed as supporting OS Windows Server 2016. Is that just because...
View ArticleRails for FPM185 KMM
Recently we have acquired a nice Dell FPM185 KMM without the mounting rails. Using the Dell Rails Matrix...
View ArticlePoweredge 610R RAM Setup
I've got a poweredge 610R server, its used as a VM platform at home for development.I've got 12 x 4GB RAM modules however cannot install them all without error, I have got 24GB installed in each white...
View Article