Poweredge 2950 III can not download files in dell drivers.
I have a used PE 2950 and am getting ready to install Windows srefer 2012 r2 on it. I have down loaded most of the driver files from Dells product page but when I try to download the files under the...
View ArticleNoise levels on T430 and T630?
Looking to upgrade a T310 to either a T430 or T630. Between the T430 and T630, which has the lowest noise level? Or are they about the same? I can only imagine something newer is going to be quieter at...
View ArticlePowerEdge T300 disk corruption
Hello,I have a client with a PE T300 that is suffering from data corruption on a 1TB RAID1 array (used as the data partition) on an SAS6 controller. The server also has a 250GB RAID1 array which is the...
View ArticleiDRAC7 Virtual Console Reads "No Signal"
I started off with a PE T420 and the Basic iDRAC7 License on my server. Recently I added a dedicated NIC along with an Enterprise License. I started off by importing the Enterprise License on to my...
View Articleplease fix DELL Diag v5162
DELL 32bit Diag v5162 is a phantom. The internal release number is 2MM6J. I found it in the repo folder of SUU 15.04 and 14.10 I think, too.LC / Dell FTP Catalog doesn't know about it.DELL Repo Manager...
View ArticleR610 memory install/upgrade
Hello,We currently have a similar config, we have 6 x 4GB of RAM totaling 24GB. We would like to get as close to 64GB as possible. I found matching 4GB sticks on Newegg, but that would only get us up...
View ArticleSet up e-mail alert from RAID events on Dell SC1430 / PERC 5i
Masters, We have an SC1430 as backup server with RAID PERC 5/i controller. I downloaded DELL SAS RAID Storage Manager and try to set up e-mail alert if any RAID events occured but i can't find any...
View ArticlePE R710 Rack Server - Error E1000 & E122E
Our R710 server failed to power up with E1000 failsafe voltage error & E122E Onboard Regulator Failed messages displayed on the front LCD panel. I first checked both power supplies and they...
View Article2.5" trays interchangeable between R series and T series?
Have an R series sever with a bunch of 2.5" NL SAS drives that a friend of a customer wants to get rid of - closing up shop or something. I have a T630 with the 16x 2.5" chassis and PERC H720 1GB used...
View ArticlePower Edge T420 Boot Selection Failed
Today upon rebooting a Dell Power Edge T420 I received an error The Boot Selection Failed because a required device is inaccessible. Status 0xc000000eWhen I tried to boot into the Windows SBS 2011...
View ArticlePoweredge R610 fan probblem E1310 and E1313
Hi allOur Poweredge R610 has just started making a loud fan noise, has a flashing amber light and the LCD displays 2 error messages1->' E1310 fan 42 missing or RPM out of range check fan' for the...
View ArticlePoweredge T310 will not start from standby
My Poweredge T310 will not cold start. When you push the power button the drive lights flash briefly. I have had it start a couple of times after disconnecting the power to the PSU's for a few...
View Articlebooting to access raid array in a T320 server w/ perc s110 and server 2012...
I have a new dell poweredge t320 with the aforementioned perc s110 controller that is looping doing windows updates. Spoke to Microsoft & they want me to boot another os & access the drive to...
View ArticleR610 memory install/upgrade
Hello,We currently have a similar config, we have 6 x 4GB of RAM totaling 24GB. We would like to get as close to 64GB as possible. I found matching 4GB sticks on Newegg, but that would only get us up...
View ArticleClik here to view.
DELLR730 server halts during boot-up when "intel_iommu=on"...
Hi,I am facing an issue with "LSI Logic / Symbios Logic MegaRAID SAS-3 3008 [Fury] (rev 02)" controller when "intel_iommu=on" parameter is enabled in grub.I am working on SRIOV and I need to enable...
View ArticleiDRAC stopped working on DELLR630 server.
<Image removed - Block out personal information such as your service tag from images>
View ArticleReplacing H710P RAID Controller
Hi, I have a H710p controller in a 10 disk PowerEdge R720 server. The current controller suffers from an intermittent battery failure (happens about 1-2 times a year, the logs display a PERC battery...
View ArticleRebuild Array
I have an old PowerEdge 2900 server with PERC 5/i Integrated controller. I have 4 SAS HDs (136GB each) configured as RAID10. The total virtual disk size is 272GB.On this HD, I've been running Windows...
View ArticleSUU multiple ISO download - how to combine?
I am downloading the Dell Server Update Utility ISO from the Dell support site, and the ISO image is split up into four ISO files. How do I combine these to burn them to a DVD?DVD ISO Image 1File...
View ArticleSystem Software Event: Drive Slot Sensor, drive fault was asserted.
Hello. I'm having trouble on the Server Power Edge T410. Event System Software: Drive Slot sensor, drive fault was asserted. I have RAID-0 and one of the disks is not working. Substiui have the drive...
View Article