lcd error PWR1006
I've got a r720 with 2 495W power supplies with 6 7.5k HDDs and 2 SSDs. When I power up the LCD screen shows the error PWR1006 saying not enough power is available, the wattage being pulled is only...
View ArticleiDrac 2.21.21.21 virtual console port bug
Hi all,we have a R430 with an idrac 8. We need to access to the virtual console, and, for many reasons, we need that its port is different from the default one (5900), let's say 5905.Everything works...
View ArticleT320 Memory Upgrade
Last year I got a T320 with 4x 8GB 1600 single rank memory setup in ECC. I'm looking to up the memory in the system now and would like to purchase 2x 16GB sticks and use the remaining slots. I know the...
View ArticleDell R410 Memory Upgrade
Hi, everyone!I have Dell R410 2xE5506 6x2GB Hynix DDR3-1066 PC3-8500E 2Rx8 non-Reg ECC RAMNow I need 32Gb memory. I want take out all 2Gb memory and put 4x8Gb (for example this one).Question.Will this...
View ArticleR410 HDD
I have server R410 with 4 x X150K Dell 300GB 15K RPM 6Gbp/s SAS 3.5", RAID 1and server R710 with HDD 600Gb 15K RPM 6Gbp/s SAS 3.5"Can I buy one spare disk 600Gb for two severs? Will hdd 600Gb work in...
View Article6950 Requires Opening Case to Boot, then Powers Off Randomly
Hello everyone,I have, what I think is, a weird issue with a PowerEdge 6950. I just received this server to act as an Software Instrument server, and it has proven to be rather reluctant to live....
View ArticleVirtual disk degraded: Virtual Disk 0 (Virtual Disk 0) Controller 0 (SAS 6/iR...
Hello,We have a problem on few M600 blade servers where we get an alert saying Virtual disk is degraded. But in the ompreport vdisk status shows OK, however when i check OMSA it shows a warning...
View Articlelcd error PWR1006
I've got a r720 with 2 495W power supplies with 6 7.5k HDDs and 2 SSDs. When I power up the LCD screen shows the error PWR1006 saying not enough power is available, the wattage being pulled is only...
View Article"weak ephemeral diffie-hellman key" error in FF39 prevents OMSA...
In Firefox version 39, some OMSA web site would give this error message:An error occurred during a connection to <server>:1311. SSL received a weak ephemeral Diffie-Hellman key in Server Key...
View ArticleServer won't boot
I have a Dell T420 server running Windows 2012. It won't boot.It starts to boot but when it get to the line"Dell ATA AHCI BIOS version 1.0.2"then stops and goes no further. Worked with Dell Chat for...
View ArticleAdding an IEEE1394 (FireWire) to an R410?
I'm new to rack hardware, and I've just bought a second-hand Dell R410 to which I'm thinking of adding an IEEE1394 (FireWire) interface.If I've understood correctly, from reading the R410 system...
View ArticleOpen Manage for PowerEdge 1600SC
Does anybody have a download link for a version of Open Manage that will work on a PowerEdge 1600SC running Windows 2003 32 bit? Currently installed is Dell Open Manage Array Manager 3.6.0 (build...
View ArticlePoweredge R710 Memory Failure.
Hello,I currently have an R710 with DIMM_A1 and DIMM_A2 occupied with Hynix 4GB 2rx8 Sticks. Which works fine.I purchased two more 4GB sticks and they turned up as Hynix 4GB 2rx4 PC3-10600R-9-10-E1 I...
View ArticleM610 won't boot with Mezzanine Card
I have an M1000e chassis with M610 (gen2) blades, servers boot fine without the mezzanine card (HX271) Card is in Fabric C. I also have an M600 blade with the same mezzanine card which boots fine.Is...
View ArticleClik here to view.
Request help in understanding following error both disk at raid ch -0 has failed
i got a dell "PE 2850" and today i noticed that this server was down so I manually rebooted this server and found the following thing on the bios creen both the drives i.e A00-00 and A00-01 has failed...
View ArticleR710 PSU requirements
Hello,I recently tried to upgrade an R710 server from a single E5520 CPU and 2x2GB of RAM to Dual X5650's and 6x8GB of RAM. The server also has a Perc 6i and 3x146GB drives. However when I did the...
View ArticleClik here to view.
Lifecycle controller FTP Firmware update failing
When I attempt to update the firmware via Licecycle ctonroller FTP option to simply the default of 'ftp.dell.com' all I get is "Connecting to FTP server to download the catalog" for about 5 minutes and...
View ArticleI can't find HD PowerEdge 2950
I try to install windows Server 2012 on PowerEdge 2950 but i can't see the Hard Diskwhat Should i do to complete the installation ?
View ArticleUSC fails to load after firmware upgrade on PET310
An older T310 with Perc 6i (no LCD, no iDRAC LAN port) had USC ver. 1.3.0.40. I could not install w2012, so I tried to upgrade the USC firmware. I installed USC ver 1.5.0.29_A00 succesfully (already...
View ArticlePowerEdge 1950 II PCI Riser
Hi,I have a Dell PowerEdge 1950 genII.But it holds an PCI64 riser,And i have seen on different forums that it could be replaced by an PCI-Ex riser.With PN: FP332I have bought the riser to find out that...
View Article