PowerEdge R610 E1211 RAID controller battery Failure PERC H700
The front panel display turns yellow and says RAID controller battery failure. Check battery.Reading 47 dozen knowledge base articles has not been a whole lot of help. There is some docs that say...
View ArticlePowerEdge R730XD - extra RAID controller
Hello,Hope someone can help me! We have just purchased 4 x R730xd servers for use with Storage Spaces Direct. The Dell Enterprise Product specialist specified a HBA330 storage controller as a normal...
View Articlehow to upgrade 8 GB RAM in dell power edge T310
Hi,Currently We are using 2GB RAM A1slo AND 2GB RAM IN A2 slot.We bought addition 8Gb Ram . We need to upgrade 8gb ram. How to upgrade the ramwe put 2gb (A1) + 2gb (A2) + 8gb (A3) slot in motherboard....
View ArticleClik here to view.
There is an unrecoverable medium error detected on virtual disk: Virtual Disk...
Hi,I have a PowerEdge 210 that has 2 physical hard drives, but wasn't configured to work with them as a raid.Someone just brought to my attention that Windows' Event Viewer reports this error (quite...
View ArticleClik here to view.
PowerEdge T320 - iDRAC remote enable question
Hi all,Is there a way to enable the iDRAC remotely from a VM hosted on a Dell PowerEdge? If so how?We currently do not know of the IP of the iDRAC or the username/password but are willing to bet the...
View ArticleWant to upgrade Power Edge 1900 server.
I have a Power Edge 1900 server and want to upgrade it, what are the recommendations , it is 32, and uses tapes to store.
View ArticleRemote Power ON (Virtual Power On) - DELL PowerEdge T410
Hello Everybody,I am having DELL PowerEdge T410 Server and would like to know. Is there any possibility to power on the server remotely? Please advise...Windows Server 2012 R2 drivers support???Thanks...
View ArticleDCS1200SX BMC update failed
Hi, Daniel or Dell Support.Is this thread for Ian only? Or I can ask questions about our C6220 as well? Our problems is also about updating BIOS and Firmware. I tried your suggested instructions with...
View ArticleLifecycle Controller IP. Is it always active?
We currently have the Windows IP and the iDrac IP setup for all our servers. We then used the lifecycle Controller to do some firmware updates which needed yet another IP address.I really don't want...
View ArticlePowerEdge T110 II - OS install
Hi, We recently took over support for a client and the server drive is failing and we need to rebuild the OS, however the old IT vendor did not give the client the OS, so we need to get a copy of...
View ArticlePowerEdge M620 doesn't work
Hello,We have a problem with blade servers M620 (assembled with E5-2670 and DIMM 8x8GB hynix) We put in the slot mezaninne 57810S-M 10GB daughter card (JVFVR) and riser card management (F5G99).After...
View ArticleDrac 5 - Session is not valid
I have an old DRAC 5 card in a server I'm trying to mount an ISO with. I have a Windows XP VM with java 6 installed. When I try to map the ISO I get the following error "Session is not valid" and then...
View ArticleIntel Network Adapter compatible with the Poweredge R210 II
Hello,i am looking for an Intel network card compatible with with my R210 II. Aisde from the Intel PRO/1000 PT. is the Intel I350-T2 I350T2V2BLK or the Intel Gigabit ET Dual Port E1G42ETBLK...
View ArticleAdd Firmware File to Dell SUU
I am trying to add the latest firmware file for the iDRAC/Lifcycle Controller to the repository on a Dell Server update utility (SUU) USB drive. I have copied the two...
View ArticleClik here to view.
PowerEdge 2950 MPT Boot Rom No supported devices found
I am not able to install windows 2003, because LSI is appearing with the following message:MPT Boot Rom No supported devices found.
View ArticleModel and/or part number for the Internal Drives for PowerEdge R510
My system does not have those internal drives, but I want to add them to the system. The bay is there. Unfortunately, I cannot find any information about the part number, model, type of the drives,...
View ArticleNew: E1000 Failsafe voltage error. Contact support.
Hi in running diagnostics on a purchasing a refurbished R610 server, I plugged in a SAS 6ir which worked fine in the server before it, I plugged in the SAS drives and booted. I selected the System...
View Article2.5 drive thickness in R430 8bay chassis
Hello I just purchased the PowerEdge R430 with 8-Bay 2.5 inch HotPlug chassis (with H330). What thickness 2.5 drives can I have in there? Will this one work? It is 15mm thickness and not the normal 7...
View ArticleR410 which H700 and cables to replace SAS 6ir
I have a R410 with 4 HDDs connected to a F678M backplane which has two cables going to a single connector on the H657J riser. The riser has a SAS 6Ir card in the white slot. As I want to switch to raid...
View Article