why is my hdd still blinking green after rebuild?
how can i fix this?
Can do it with megacli?
it is a 2 hdd raid 1
megacli -LDInfo -Lall -aALL
Adapter 0 -- Virtual Drive Information:
Virtual Drive: 0 (Target Id: 0)
Name :
RAID Level : Primary-1, Secondary-0, RAID Level Qualifier-0
Size : 67.75 GB
Sector Size : 512
Mirror Data : 67.75 GB
State : Optimal
Strip Size : 64 KB
Number Of Drives : 2
Span Depth : 1
Default Cache Policy: WriteBack, ReadAheadNone, Direct, No Write Cache if Bad BBU
Current Cache Policy: WriteBack, ReadAheadNone, Direct, No Write Cache if Bad BBU
Default Access Policy: Read/Write
Current Access Policy: Read/Write
Disk Cache Policy : Disk's Default
Encryption Type : None
Is VD Cached: No
Exit Code: 0x00
megacli -PDList -aALL
Adapter #0
Enclosure Device ID: 32
Slot Number: 0
Drive's position: DiskGroup: 0, Span: 0, Arm: 0
Enclosure position: N/A
Device Id: 0
WWN:
Sequence Number: 2
Media Error Count: 0
Other Error Count: 0
Predictive Failure Count: 0
Last Predictive Failure Event Seq Number: 0
PD Type: SAS
Raw Size: 68.366 GB [0x88bb93a Sectors]
Non Coerced Size: 67.866 GB [0x87bb93a Sectors]
Coerced Size: 67.75 GB [0x8780000 Sectors]
Sector Size: 0
Firmware state: Online, Spun Up
Device Firmware Level: D906
Shield Counter: 0
Successful diagnostics completion on : N/A
SAS Address(0): 0x500000e1190dcf12
SAS Address(1): 0x0
Connected Port Number: 0(path0)
Inquiry Data: FUJITSU MBE2073RC D906D5A4PBC02PM8
FDE Capable: Not Capable
FDE Enable: Disable
Secured: Unsecured
Locked: Unlocked
Needs EKM Attention: No
Foreign State: None
Device Speed: Unknown
Link Speed: Unknown
Media Type: Hard Disk Device
Drive Temperature :28C (82.40 F)
PI Eligibility: No
Drive is formatted for PI information: No
PI: No PI
Port-0 :
Port status: Active
Port's Linkspeed: Unknown
Port-1 :
Port status: Active
Port's Linkspeed: Unknown
Drive has flagged a S.M.A.R.T alert : No
Enclosure Device ID: 32
Slot Number: 1
Drive's position: DiskGroup: 0, Span: 0, Arm: 1
Enclosure position: N/A
Device Id: 1
WWN:
Sequence Number: 17
Media Error Count: 0
Other Error Count: 0
Predictive Failure Count: 0
Last Predictive Failure Event Seq Number: 0
PD Type: SAS
Raw Size: 68.366 GB [0x88bb93a Sectors]
Non Coerced Size: 67.866 GB [0x87bb93a Sectors]
Coerced Size: 67.75 GB [0x8780000 Sectors]
Sector Size: 0
Firmware state: Online, Spun Up
Device Firmware Level: D905
Shield Counter: 0
Successful diagnostics completion on : N/A
SAS Address(0): 0x500000e11755cde2
SAS Address(1): 0x0
Connected Port Number: 1(path0)
Inquiry Data: FUJITSU MBE2073RC D905D5A4PB201C1U
FDE Capable: Not Capable
FDE Enable: Disable
Secured: Unsecured
Locked: Unlocked
Needs EKM Attention: No
Foreign State: None
Device Speed: Unknown
Link Speed: Unknown
Media Type: Hard Disk Device
Drive Temperature :29C (84.20 F)
PI Eligibility: No
Drive is formatted for PI information: No
PI: No PI
Port-0 :
Port status: Active
Port's Linkspeed: Unknown
Port-1 :
Port status: Active
Port's Linkspeed: Unknown
Drive has flagged a S.M.A.R.T alert : No
Exit Code: 0x00