s100 perc raid controller problem
Hello. The company I'm working for had purchased dell poweredge r210 II, equipped with s100 perc raid controller. When I try to install windows server 2012 r2 it asks for raid drivers. For this product...
View ArticleUpgrade disk space RAID 5 with H310 Controller
Hi, I have a Poweredge T320 server with an H310 controller in RAID 5 with three 500gb disks. I have room to add one more 500gb drive to the array, but would like to get more disk space. With the H310...
View ArticlePoweredge vrtx oob configuration on flat subnet
Hey all,I just received our poweredge vrtx system with two m520 blade's that are going to be utilized as virtual servers, everything is setup and good to go as far as the blade's and storage goes,...
View ArticleFailing Hard Drive
I have a PowerEdge with a flashing amber light on one of the hard drives. I don t see any error on in the server event logs. The SCSI congroler is PERC 4e/Di RAID Controller and the hard drive is...
View ArticleClik here to view.
DRAC refuses to update NIC, PSU firmware after upload
Hello,I have 32 PowerEdge R720s with three four-port Intel i350-t4 NICs. With both the NICs and the Liteon PSUs, I have been unable to update their firmware via DRAC or LCC. When attempting to update...
View ArticleR720 with BROADCOM 5720 NIC does not boot after centos update_firmware
I get:Plug & Play Configuration ErrorIntegrated Nic 1 Option ROM Checksum Errorrepeats for NIC 2 etcsystem will then not boot unless I disable the nic cardthe cntr-s option has also vanishedwith...
View ArticleServer 2012 can't see sas drive to install to.
Hi all,I'm having a big issue i can't seem to find many details on, I've just bought a server it's a Dell Poweredge 1950 iii twin xeon L5420 with 16GB ram i've got a single 73GB sas drive and trying to...
View ArticlePowerEdge T310 PERCH200
A bit stucked, and trying to read manual. We have a Dell PowerEdge T310 server and was/is configured with PERC H200 Controller.I am not that familiar with the RAID setup using the "lsi perc h200 6gbps...
View ArticleVulnerabilities identified on DRAC/iDRAC
We've recently being undergoing some security scans within our environment. Across our DRACs/iDRACs a number of vulnerabilities have been identified which we cannot find resolutions...
View ArticlePowerEdge2950 II Blade Not booting
I have a PowerEdge 2950 II Server that will not turn on. Power supplies have green lights, Front LED indicator is blue with no message, back information light is blue. Nothing happens when the power...
View ArticlePowerEdge C2100 Internal drive controller
I have several C2100 units and decided to get the OS off the main drives(front bays) and utilizethe internal drives. I purchased the internal SATA drive cable which has two SATA connectors on one end...
View ArticleDebian 7 & PERC 100 problem with installation
HI,I have bought this week a DELL T110 II with 2 2TB sata disk and first of all I have discovered how to create a virtualdisk with these disks.Later, I have started DEbian install process and when I...
View ArticlePERC 4e/Di Freezes on Config
Good afternoon, folks. We've got a legacy system that's been giving us trouble today, and I'd like to get a second opinion on the matter. We have a PE 2850 that refuses to boot. It'll go through all...
View ArticleFabric mismatch on M620 w/ 10G on B
My M1000 system has two MXL (A1/B1) and 2 M I/O Aggregator (A2/B2). Nothing is in C1/C2.My CMC reports A1/A2/B1/B2 are '10 GbE KR' which I believe is correct.I have just installed some 10G cards 06ycp8...
View ArticleUpgrade disk space RAID 5 with H310 Controller
Hi, I have a Poweredge T320 server with an H310 controller in RAID 5 with three 500gb disks. I have room to add one more 500gb drive to the array, but would like to get more disk space. With the H310...
View ArticlePowerEdge T420 Server with Broadcom 5720 NIC
Network Card not being recognized by Windows Server 2008 R2 SP1. Can someone point me to the specific driver/software that needs to be implemented in order for my network card to be recognized by the...
View ArticleDell PowerEdge 2900 Gen 3 storage question
Server is up to date on firmware and BIOS, Has a 6i SAS6 controller. OS is Ubuntu Server 14.04 LTS.Drive is a 4TB Seagate...Shows up in gdisk and parted as only being 2TB. If I pop the tray out and put...
View ArticleHow To Get Windows Server 2008 replacement install Disk For the Lic. # on the...
Hello and thanks for the hard drive help I am up and ready to install Windows server 2008.But I do not know where and how to download install disk that will work on my Lic software #s on the server...
View ArticleOn two PowerEdge T605 I get for the internal disk : SATA link up 1.5 Gbps. Is...
Hi All,When running : "dmeg | grep ata1", I'm getting the following:ata1: SATA max UDMA/133 mmio m8192@0xee2fe000 port 0xee2fe000 irq 10ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 320)ata1.00:...
View ArticleMonitoring Dell UPS using network management card 2
Hi,We have Dell smart UPS 3000 with NMC 2. i have connected the card and it's showing solid green( means it has taken DHCP address), but i am unable to configure it for UPS monitoring. Can someone help...
View Article