Dell poweredge T20 will not post
I have a dell poweredge T20 that I just did the BIOS update version a05 to version a11 then it rebooted when it completed then it would not boot afterwards. I have tried disconnecting all external...
View ArticleIdrac6 PowerEdge R710
Good Day and HNY to allI am running a ms 2008 64 bit on a PowerEdge R710 Dell ServerAfter an electricity shut down , during the boot i get this messageIDRAC6 not responding. Power required may...
View ArticlePowerEdge M610 and BCM57111 firmware update troubles
Hi,I am currently doing a maintenance on our m1000e chassis, flashing the firmwares to the latest versions.Our setup is:- m1000e chassisA1 - Dell PowerConnect M6220 A2 - Dell PowerConnect M6220 B1 -...
View ArticlePoweredge 2900 Flex Bay error (with no Flex Bay installed or intended to be...
Real stumper here. We have a Poweredge 2900 and are using a PERC 5/i RAID controller. BIOS, backplane, baseboard controller and RAID controller are all on current firmware now.On boot, the machine...
View ArticleNeed help identifying problem with POST error message on PE2900-III please...
Last night our PE2900-III server had some strange I/O errors - was unable to unmount an external USB drive, etc. This system runs CentOS 7 with KVM and was host to several VMs.I decided to investigate...
View ArticleUnable to enable VT-x with Extended Page Tables (EPT)
Hello,I have a Dell PE R610 with Bios version 6.4.0 and Dual Processor X5650's, running server 2016 with Hyper-V.The X5650 processor says it supports Intel® VT-x with Extended Page Tables (EPT). I have...
View ArticleNewbie: Missing disks on M610
Hi,I just bought a M1000e with M610 blades for training purposes. I popped in two Dell branded SAS drives but nothing is presented to Linux (run on SD card) and nothing is found during the BIOS POST....
View ArticleWindows Server 2016 / Lifecycle Controller
New Lifecycle Controller 2.40.40.40 was released Oct 12, the same day as Windows Server 2016 general availability, but it doesn't appear to support Server 2016. (I expected to see Windows Server 2016...
View ArticleServer will not boot into windows - I believe due to no system drive space?
I noticed that the system drive was completely out of space - so I rebooted the server thinking that during a reboot it might free up some space... but it would not boot into windows - it will go to...
View Articlepoweredge T410 only boots to recovery mode
One of my clients servers appears to have been hacked and now it only boots to recovery mode. Upon first attempt to get in to the recovery mode the server said the login information was incorrect. I...
View ArticlePE R720 PSU mismatch issue
Hi-We had a PSU go bad in one of our R720s. The server was reporting a mismatch with the good PS flashing green, and the bad PS flashing amber. Server administrator reported PS1 in a good state, and...
View ArticlePoweredge 2900 Flex Bay error (with no Flex Bay installed or intended to be...
Real stumper here. We have a Poweredge 2900 and are using a PERC 5/i RAID controller. BIOS, backplane, baseboard controller and RAID controller are all on current firmware now.On boot, the machine...
View ArticleCable for HBA330 controller
hello,i need to install a HBA330 controller on my R730 server, i currently have a PERC 730 mini installed.i want to replace between to controllers , the problem is that the current controller got a...
View ArticleSED drive shows blocked
R720XD with H710p controller. Drive is a Dell 600B SED drive P/N: YJTKX , Drive is used if that makes a difference. Upgraded firmware on controller to 21.3.4-0001. Drive shows blocked. Only option...
View ArticlePowerEdge T300 RAID SAS6 IR bad disk
I have a RAID 1 setup with 2 disks making up the RAID and 1 hot spare (total of 3 disks). My primary disk is blinking amber/green (showing smart errors). Knowing that the disk will probably fail in...
View ArticleClik here to view.
Dell Poweredge T20 with raid 10 how to recovery data on system ? Help me
I have T20 with 4hdd 3Tb and configuration RAID 10, yesterday run ok but now it can not boot OS and only run to Raid config , please see the picture , Who can help me make save data on system
View ArticleDell Poweredge R720 (No drives detected)
I haven't really used any Dell servers before so sorry in advance if this is a dumb question.Back story - I recently inherited a recycled R720 server which used only SAN storage and no physical drives....
View ArticlePowerEdge R815 multiple drive failed and missing drive. OS is not loding up.
Hi all,I have few issue and not sure where to start.I have PowerEdge R815, Windows 2012R2 with Raid 5 config. with 6 drive. And Perch H700 controller.The issues are first, multiple drives has failed...
View ArticleAbout Temperature Detector Sensor in Dell Server
Dear Support Team From Dell I would like to know "Is there include temperature detector sensor in Dell Machine?" eg: Power Edge 320 and Power Edge 720If included : What type of monitoring software is...
View ArticleDell 1081AD KVM Remote Java Session only works after full reset
Hi all,I've got a strange error on our 1081AD KVM, I can only launch a KVM session after a full reset, and during a few hours timeframe ( could not pinpoint exactly yet) , after that, I cannot launch...
View Article